MossGo generally rejuvenates surfaces by removing the black and green discolourations from biological origin.

The procedure is: Dilute Mossgo in a watering can or garden sprayer at a ratio between 1 to 10 to 1 to 14 according to the task at hand. Wet the surface sufficiently to flood the gaps or interstices. Within a few hours the work is done. Algae and spores are now killed. The weather will cleanse the surfaces.

Black dots on Indian sandstone: Some lichen are so deeply ingrained that power washing does not affect them: Mossgo will kill the offending growth. Three weeks after a wet brushing with bristle brush is likely to remove them.

Paving blocks: A periodical application of Mossgo will alleviate the need for heavier maintenance and the use of high pressure jetting. Mossgo is surfactant (soap) and can be used as such for the removal of greasy marks. A weak mix is sometimes used to feed a rotary surface cleaner. Doing so cleanses deeper than when using fresh water or a proprietary soap.

Red algae on render: Mossgo is particularly successful on red algae contamination. This condition is common on alkali substrates - cement render and pebble dash - in marine atmospheres.